Technical Requirements

1. Made of 1.5mm thick 304 stainless steel plate welded into shape; with mounting plate, mirror-polished surface finish;

2. Linear and angular dimensional tolerances without specified tolerances are in accordance with GB/T 1804-m;

3. Welding without slag inclusion, lack of fusion, or leakage, with a smooth and beautiful surface at the weld;

4. The surface must be free from bumps and scratches, with internal and external grounding screws;

5. Wall-mounted installation, bottom inlet and outlet, dimensions: 310*250*180;

6. Quantity: 6 units;

7. Protection level: IP65 Corrosion resistance level: WF2

Features

Facilitates the control of material viscosity during on-site production. At a certain temperature, the viscosity of the material changes with temperature. The control system collects data and can adjust the programmable controller according to the viscosity, or connect to the DCS system to control the addition of materials on-site.

Technical Parameters

Power supply: 220VAC Output: Dual-channel 4-20ma, 7-inch LCD screen, displays dynamic viscosity, kinematic viscosity, and temperature and density. 24 viscosity points can be calibrated on the screen, and the duty cycle can also be adjusted, simultaneously controlling the equipment parameters at different viscosity upper and lower limits. Explosion-proof control box.
Main Parameter Display

Main Parameter Display

This interface is the main interface for displaying all parameters.